News & Events

Upcoming Events

Jun
3
Mon
SEM Annual Conference
Jun 3 – Jun 6 all-day

SEM 2019 banner


Join us at the Society for Experimental Mechanics (SEM) Annual Conference on June 3-6th in Reno, Nevada at the Peppermill Resort. Our Vice President, Tim Schmidt, will be presenting a paper titled Advanced and Field Applications of the ARAMIS 3D DIC System. The paper will be given in the Technology Applications session. The conference has many other excellent presentations and exhibitors scheduled that will no doubt provide invaluable industry insights. We look forward to seeing you there!

Jun
4
Tue
Industry 4.0 Formability Workshop
Jun 4 @ 8:00 am – 12:00 pm

Industry 4.0 Formability Workshop -Southfield, MI



Join us in Southfield, MI for the Industry 4.0 Formability Workshop. This event will be showcasing our ALER (Autonomous Laser Etching Robot), ARGUS Scan box, ARAMIS for material characterization and ARAMIS High-speed for Press Deflection. These cutting-edge technologies were created to benefit daily manufacturing with formability issues and greatly increase your throughput, product quality, and profitability. Come learn how this technology can automate and significantly increase the quality of your panels, by decreasing your daily cost for doing business. We look forward to seeing and working with you.

Topics covered in this workshop will include:

  • ALER (Autonomous Laser Etching Robot)
  • ARGUS Scan box
  • ARAMIS for material characterization
  • ARAMIS High-speed for Press Deflection

Agenda


 Where:                                                                   

Lawrence Technological University

Building: University Technology and Learning Center

Room T429 – The Lear Auditorium

21000 West Ten Mile Road

Southfield, MI 480

Campus Map


 

Register for Industry 4.0 Formability Workshop - June 4, 2019

Jun
5
Wed
ARGUS Training@Trilion – Southfield, MI
Jun 5 – Jun 7 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Register Below

Register for ARGUS Training@Trilion MI - June 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jun
6
Thu
Rethink Plastics – Knowledge Day
Jun 6 @ 9:00 am – 3:30 pm

 

knowledge day rethink plastics


Join us at Rethink Plastics – Knowledge Day on Thursday, June 6th located in Chicago, IL at the Wyndham Garden Schaumburg Chicago Northwest. We will have a table presenting the latest of Trilion’s technology, as well as leading the Expert Talk session on 3D Testing. This event will show how companies working in automotive, aerospace, consumer goods, and medical fields are using cutting-edge 3D measurement technology on 3D printed, injection molded, and plastic parts along with associated tooling to save time and money. This is one event you are not going to want to miss!

Jun
17
Mon
ARAMIS Training@Trilion – Seattle , WA
Jun 17 – Jun 18 all-day

ARAMIS Training@Trilion – Seattle , WA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

Where: ATLAS Workbase

Pacific Northwest
(206) 596-1133
500 Mercer St., Suite C2
Seattle, WA 98109

Register Below

Register for ARAMIS Training@Trilion Seattle - June 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jun
23
Sun
POWDERMET2019
Jun 23 – Jun 26 all-day

POWDERMET2019 banner


Join us at the POWDERMET2019 conference on June 23-26th in Phoenix, AZ at the Sheraton Grand Phoenix. One of our Technical Account Managers, Charles-Olivier Amyot, will be presenting an exciting paper. The conference has many excellent presentations and exhibitors scheduled that will no doubt provide invaluable industry insights.

Jun
25
Tue
High-Speed Digital Image Correlation Course
Jun 25 – Jun 27 all-day

 

High-Speed DIC Course Banner


Join us as we team up with Vision Research’s Phantom Academy of High-Speed. To bring you a High-Speed DIC Course. You’re not going to want to miss this opportunity to become expert users in the art of high-speed digital image correlation!

Click the button below to learn more and register:

Learn More

Jul
11
Thu
Rethink Plastics – Knowledge Day
Jul 11 @ 9:00 am – 3:30 pm

 

knowledge day rethink plastics


Join us at Rethink Plastics – Knowledge Day on Thursday, July 11th located in Philadelphia, PA at the Four Points by Sheraton Philadelphia Northeast. We will have a table presenting the latest of Trilion’s technology, as well as leading the Expert Talk session on 3D Testing. This event will show how companies working in automotive, aerospace, consumer goods, and medical fields are using cutting-edge 3D measurement technology on 3D printed, injection molded, and plastic parts along with associated tooling to save time and money. This is one event you are not going to want to miss!

Jul
23
Tue
ARAMIS Training@Trilion – King of Prussia, PA
Jul 23 – Jul 26 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

July 23-24 will cover basic training while July 25-26 will cover advanced training.

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less then 5 miles away form our office

Register Below

Register for ARAMIS Training@Trilion - July 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Aug
13
Tue
ARAMIS Training@Trilion – Southfield, MI
Aug 13 – Aug 16 all-day

ARAMIS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E4D.

August 13-14 will cover basic training while August 15 – 16 will cover advanced training.

Time: 9:30 am – 5:00 pm

Register Below

Register for ARAMIS Training@Trilion MI - August 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Aug
21
Wed
ACMA Composites Technology Day at General Motors
Aug 21 – Aug 22 all-day

ACMA Composites Technology Day at General Motors


Join us for ACMA Composites Technology Day at General Motors in Warren, MI August 21 – 22. Come hear our president, John Tyson, present a paper and make sure to stop by our booth!

Sep
11
Wed
ARGUS Training@Trilion – Southfield, MI
Sep 11 – Sep 13 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in the Engineering Building, Room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - September 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Sep
23
Mon
CAMX 2019 Expo
Sep 23 – Sep 26 all-day

 

CAMX Banner


Please visit us in booth N78 at The Composites and Advanced Materials (CAMX) Expo in Anaheim, CA, September 23th – 26th. We look forward to showing off how our Digital Image Correlation technology has been supporting the composite and advanced material industries.

One of our Technical Account Managers, Charles-Olivier Amyot, will be leading an Education Session under the Non-Destructive Evaluation & Testing Conference Track!

Title: Effective Integration of Flexible Testing Capabilities into the Entire Product Development Process

When: Wednesday, September 25 from 8:00 AM – 8:50 AM

Where: Convention Center I 208A

Learning Objectives: Upon completion, participants will be able to:

  • Setup a 2D DIC system
  • Calibrate a system
  • Understand the noise in a measurement
  • Visualize the measuring volume and the epipolar line
  • Understand the difference between facet size and point distance
  • Obtain a visual representation of displacements and strain data
  • Export data as video, PDF or CSV

 

You can register and learn more about the expo at CAMX’s website.

Oct
9
Wed
ARAMIS Tech Day 2019
Oct 9 @ 9:00 am – 6:00 pm

ARAMIS Tech Day 2019

Digital Image Correlation in Materials and Component Testing



Join us Wednesday, October 9th in King of Prussia, PA  as we host the American ARAMIS Tech Day 2019, a global GOM GmbH event.  Discover the benefits of our full-field displacement and strain measurement technology compared to traditional measuring devices such as strain gages and LVDTs.  Meet industry experts, testing engineers and specialists from manufacturing, research & development and quality assurance.  Following ARAMIS Tech Day we will be hosting two days of digital image correlation training October 10th -11th for which you will need to register separately HERE.

Event Flyer


Topics covered in this workshop will include:

 

                              Materials Testing & Simulation                                          Component Testing

.                           Optical metrology analyzes the mechanical properties and          DIC measurements, and real-time 3D tracking, support dynamic
                            behavior of materials in various test scenarios. GOM‘s                   deformation analysis during static and fatigue tests for entire
.                           ARAMIS systems can be integrated into existing test                      components. GOM‘s high-speed and standard-speed measuring
 .                          environments, test benches, and testing machines.                       systems can be easily integrated with standard test stands.
.

.                                                     •  Tensile test                                                                                                    •  Vibration analysis

.                                                     •  Nakajima (FLC) and bulge tests                                                                 •  Structural and finite testing

.                                                     •  Stress-strain evaluations                                                                            •  Impact and crash testing

   .                                                  • Shear tests                                                                                                     • Simulation validation


Event Agenda:

 

Presentations –Two presentations from GOM and customers each are planned for the introduction of optical metrology and advanced applications, together with customers’ current use and strengths of optical metrology in materials and component testing.

Expert talks –Six communication areas offer the opportunity to get to know the functions and features of the GOM software as well as new developments in 3D metrology based on examples from daily practice.

Knowledge Tracks – Introduction and practical application of optical metrology, Digital Image Correlation (DIC) and point-based evaluation in materials and component testing are imparted in four Knowledge Tracks.

Industrial meeting platform – It offers a platform for the exchange of user experience with optical measuring technology and partner knowledge on synchronous testing with GOM’s software.


Where:

ARAMIS Tech Day 2019 will be held at our beautiful headquarters in King of Prussia, PA right outside of Philadelphia!  Food is included, so please let us know if you have any dietary restrictions.

Office:
(215) 710-3000
651 Park Avenue
King of Prussia, PA 19406

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less than 1 miles away from our office

Register for ARAMIS Tech Day - Oct 9, 2019

Oct
10
Thu
ARAMIS Training@Trilion – King of Prussia, PA
Oct 10 – Oct 11 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Following ARAMIS Tech Day Trilion will be hosting two days of ARAMIS training on October 10 -11th. This training will focus on all things ARAMIS including GOM Correlate, our digital image correlation (DIC) and evaluation software for materials research and component testing. Everyone is welcome and there is no charge! Lunch will be provided, so please let us know if you have any dietary restrictions.

The Training@Trilion will be held at our beautiful headquarters in King of Prussia, PA right outside of Philadelphia!

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less than 1 miles away from our office

Register Below

Register for Digital Image Correlation Training - Oct. 10 - 11th 2019

Oct
14
Mon
iDICs 2019 – Portland, OR
Oct 14 – Oct 17 all-day

iDICs banner


The iDICs 2019 Conference and Workshop provides a forum to extend the frontiers of DIC technology, standardize its use, and improve its practice. This meeting brings together leading experts from industry, academia, and laboratories from around the world. Since its inception in 2015, it has become the centralized nucleus for the state-of-the-art in DIC.

Oct
22
Tue
Automotive Testing Expo 2019
Oct 22 – Oct 24 all-day

Automotive Testing Expo banner


Please visit us in booth #16032 at the Automotive Testing Expo in Novi, MI, October 22th – 24th. We look forward to showing off how our Digital Image Correlation technology has been supporting the Automotive industry.

Also, our Sales Director, Jonathan Pickworth, will be giving an exciting paper!

Title: Next-generation non-contact strain and displacement sensor technologies

When: Thursday, October 24th at 12:20 pm

You can register and learn more about the expo at the Automotive Testing website

Oct
31
Thu
AIAM Aerospace Technology Expo
Oct 31 all-day

AIAM Aerospace Technology Expo Banner


Please visit us in booth #17 at the AIAM Aerospace Technology Expo in Ann Arbor, MI, October 31. We look forward to showing off how our Digital Image Correlation technology has been supporting the Aerospace industry. You can register and learn more about the expo at the AIAM Aerospace Technology Expo’s website.

Dec
10
Tue
ARGUS Training@Trilion – Southfield, MI
Dec 10 – Dec 12 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Register Below

Register for ARGUS Training@Trilion MI - December 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jan
29
Wed
Tech Talk – Duke University
Jan 29 @ 1:00 pm – 3:00 pm

Tech Talk at Duke University – Durham, NC

Join us for our Tech Talk on Digital Image Correlation (DIC)  at Duke University in Durham, NC, on January  29th, 2020, from 1:00 – 3:00 pm. The presentation will be on using the ARAMIS 3D Optical DIC system, and how it’s revolutionizing strain and displacement measurements with applications in Automotive, Aerospace, Biomechanics, and much more. Following the presentation, there will be a live demonstration of the ARAMIS system with a Q&A session.  Don’t miss this opportunity to see where testing is headed!

Where:

  • School: Duke University
  • Building: Hudson Hall
  • Room: 125
  • Address: Science Dr, Durham, NC 27710
Feb
10
Mon
SEM – IMAC Houston, TX
Feb 10 – Feb 13 all-day

IMAC conference banner

Please join us at IMAC hosted by the Society for Experimental Mechanics in Houston, Texas. We will be exhibiting in booth 209, so be sure to stop by! We are also thrilled to be sponsoring the Student Paper Awards, so make sure to get your papers in and good luck to all who participate.

 

Feb
25
Tue
ARAMIS Training@Trilion – Southfield, MI
Feb 25 – Feb 28 all-day

ARAMIS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

February 25 – 26 will cover basic training while February 27 – 28 will cover advanced training.

Campus Map

Register Below

Register for ARAMIS Training@Trilion MI - February 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here
Feb
26
Wed
Webinar: High-Speed Digital Image Correlation with Phantom High-Speed Cameras
Feb 26 @ 10:30 am – 12:00 pm

High-Speed Digital Image Correlation with Phantom High-Speed Cameras Webinar


High-Speed Digital Image Correlation Webinar with Phantom High-Speed Cameras


Join us Wednesday, February 26th, from 10:30 am – 12:00 pm as we host a webinar with Vision Research, AMETEK, the company behind Phantom High-Speed Cameras. The webinar will be hosted by two world-class engineers who are experts in their respected fields. You’re not going to want to miss this great event!

Digital Image Correlation (DIC) is a widely used, full-field measurement technique, in which a calibrated stereo camera pair determines the 3D coordinates of thousands of points within a dot pattern that is applied with spray paint or ink.

During rapid post-processing, reference coordinates are subtracted from each measurement frame, thus obtaining full-field 3D displacements and strains that can be viewed as color maps, movies, vectors, time histories, etc. The system can determine local displacements at the micron level despite significant rigid body motion and can take measurements anywhere from 1000 frames per second (fps) to 5 million (fps), doing the work of 10,000 strain gages in a fraction of the time.

This 1.5-hour webinar held jointly with Vision Research, AMETEK will present the benefits of DIC in high-speed applications as well as the Phantom High-Speed camera line. After the presentation, there will be exciting live demonstrations of ARAMIS, our 3D DIC system paired with Phantom cameras.


Register Here

Mar
4
Wed
SAMPE High Desert Technical Symposium
Mar 4 all-day

SAMPE High Desert Logo


Join us March 4th for the SAMPE High Desert Technical Symposium held in Lancaster, CA.  Be sure to stop by booth 36 to get an inside look at what ARAMIS Optical Strain Gage and Digital Image Correlation technology can do for you!  Also join us as one of our Technical Account Managers, Charles-Olivier Amyot, presents an exciting paper on this revolutionary technology. You can register and learn more about the expo at SAMPE’s website.

Mar
18
Wed
Next Generation High-Speed Measurement Workshop
Mar 18 @ 9:00 am – 1:00 pm

Next-Generation High-Speed Measurement Workshop

Performing non-contact strain and displacement measurements with optical equipment.


Banner for Next-Generation High-Speed Measurement Workshop


Do you have an interest in high-speed strain and displacement measurements? Regardless of what type of high-speed camera you use, or even if you don’t have one at all, this workshop will show you how to turn your images into quantitative results for your testing using our Digital Image Correlation software.

Join us at the National Museum of the U.S. Air Force in Wright-Patterson AFB, OH (just outside of Dayton) for our half-day Next-Generation High-Speed Measurement Workshop. This event will showcase how easily you can take high-speed measurements with ARAMIS 3D Digital Image Correlation (DIC) System, including high-speed strain, displacements, and vibration analysis measurements. The workshop will be held in conjunction with the experts at Photron High-Speed Cameras. You don’t want to miss this opportunity to become expert users in the art of high-speed digital image correlation!

Digital Image Correlation provides precise measurements of real, complex materials and structures, making it the perfect tool in aerospace testing. Using high-speed camera equipment can provide critical data for accurate measurement and precise validation of computer models. Opening the door for several applications such as ballistic impact, bomb blast effect testing, crash testing, Hopkinson Bar testing, etc. ARAMIS is reported to be 10x cheaper than traditional gages, 50x faster to use, and 100x more data for better model validation!

Included with the workshop is a free copy of our 2D evaluation software. Trilion can readily import test images from any external camera, making this workshop open to all who have high-speed camera equipment.


Who should attend?

Managers, engineers, R&D scientists, technicians, executives, academics, and students are all invited to enhance their career in non-contact measurement through this network and knowledge sharing event.


Hosts:

Justin Bucienski, Trilion Quality Systems

John Huhn, Photron

Brian Smyers, Wright-Patterson AFB


Aim of the Workshop?

To deliver technical information for using images from high-speed cameras to conduct non-contact measurement. The content will cover:

  • A greater understanding of types of high-speed optical testing
  • Basic principles of Digital Image Correlation
  • Technical setup and software import of images
  • The use of effective 2D and 3D digital image correlation
  • Practical applications you can develop across material testing, structural testing, vibration analysis, and additive manufacturing

Where:

National Museum of the U.S. Air Force

1100 Spaatz Street

PO Box 33624

Wright-Patterson AFB OH

45433

Room: TBA


Additional Information:

  • Cost of Event: Free
  • Included with registration is a copy of the latest GOM correlation software
  • Lunch and two coffee breaks are included in your registration — giving you the additional opportunity to speak with experts and enjoy the museum! Please let us know if you have any dietary restrictions.

Agenda: TBA


Next Generation High-Speed Measurement Workshop

News

February 14, 2020

Pinto Horse Experiment

Our team in Seattle did an experiment using an ARAMIS Optical Strain Gage to track the displacement of a toy horse as it roamed.
February 7, 2020

Scorpion Experiment

Our team in Seattle did an experiment using an ARAMIS Optical Strain Gage to track the displacement of a toy scorpion as it ran across a desk.
January 21, 2020

Speed Ahead of the Competition in 2020:

ARAMIS 3D DIC has the ability to measure high strain rate, displacement, and vibration for 1K frames per second (fps) to 5M (fps). ARAMIS works seamlessly with the best high-speed cameras in the world.
January 10, 2020

Rain Boot Experiment

Our team in Seattle did an experiment using an ARAMIS system to look at the deformation caused by filling a rain boot up with a gallon of water!
May 3, 2019

Stamping Out the Bad Parts Webinar Archive 2019

Stamping Out the Bad Parts Webinar Archive 2019 Thank you for your interest in our Stamping Out the Bad Parts webinar! If you missed it or […]
March 25, 2019

Automotive Industry Webinar Archive 2019

Automotive Industry Webinar Archive 2019 Thank you for your interest in our Non-Contact Strain and Displacements Measurements in the Automotive Industry webinar! If you missed it […]
February 27, 2019

Leveraging Non-Contacting Strain Measurements Solutions Edition 1

MTS Systems Case Study: Leveraging Non-Contacting Strain Measurements Solutions at Lehigh University The purpose of the “Leveraging Non-Contacting Strain Measurements Solutions” series is to highlight real-world […]
February 25, 2019

Composites/AM- Circle of Life

Composites/AM- Circle of Life Holistic optical metrology reduces costs, improves quality Trilion Quality System’s Founder and President, John Tyson, wrote a great article that was featured […]
January 15, 2019

General Atomics Using RVAT

How RVAT is Helping General Atomics Jeff Sloan, Editor-in-Chief of CompositesWorld, wrote a great article about the latest innovation of General Atomics Aeronautical Systems Inc. (GA-ASI). […]
December 6, 2018

Photron Webinar Archive 2018

Photron Webinar Archive 2018 Thank you for your interest in our 3D Displacement and Strain Measurements with High-Speed Cameras webinar! If you missed it or are […]

Jun
5
Wed
ARGUS Training@Trilion – Southfield, MI
Jun 5 – Jun 7 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Register Below

Register for ARGUS Training@Trilion MI - June 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jun
17
Mon
ARAMIS Training@Trilion – Seattle , WA
Jun 17 – Jun 18 all-day

ARAMIS Training@Trilion – Seattle , WA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

Where: ATLAS Workbase

Pacific Northwest
(206) 596-1133
500 Mercer St., Suite C2
Seattle, WA 98109

Register Below

Register for ARAMIS Training@Trilion Seattle - June 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jul
23
Tue
ARAMIS Training@Trilion – King of Prussia, PA
Jul 23 – Jul 26 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

July 23-24 will cover basic training while July 25-26 will cover advanced training.

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less then 5 miles away form our office

Register Below

Register for ARAMIS Training@Trilion - July 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Aug
13
Tue
ARAMIS Training@Trilion – Southfield, MI
Aug 13 – Aug 16 all-day

ARAMIS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E4D.

August 13-14 will cover basic training while August 15 – 16 will cover advanced training.

Time: 9:30 am – 5:00 pm

Register Below

Register for ARAMIS Training@Trilion MI - August 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Sep
11
Wed
ARGUS Training@Trilion – Southfield, MI
Sep 11 – Sep 13 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in the Engineering Building, Room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - September 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Oct
10
Thu
ARAMIS Training@Trilion – King of Prussia, PA
Oct 10 – Oct 11 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Following ARAMIS Tech Day Trilion will be hosting two days of ARAMIS training on October 10 -11th. This training will focus on all things ARAMIS including GOM Correlate, our digital image correlation (DIC) and evaluation software for materials research and component testing. Everyone is welcome and there is no charge! Lunch will be provided, so please let us know if you have any dietary restrictions.

The Training@Trilion will be held at our beautiful headquarters in King of Prussia, PA right outside of Philadelphia!

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less than 1 miles away from our office

Register Below

Register for Digital Image Correlation Training - Oct. 10 - 11th 2019

Dec
10
Tue
ARGUS Training@Trilion – Southfield, MI
Dec 10 – Dec 12 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Register Below

Register for ARGUS Training@Trilion MI - December 2019

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jan
29
Wed
Tech Talk – Duke University
Jan 29 @ 1:00 pm – 3:00 pm

Tech Talk at Duke University – Durham, NC

Join us for our Tech Talk on Digital Image Correlation (DIC)  at Duke University in Durham, NC, on January  29th, 2020, from 1:00 – 3:00 pm. The presentation will be on using the ARAMIS 3D Optical DIC system, and how it’s revolutionizing strain and displacement measurements with applications in Automotive, Aerospace, Biomechanics, and much more. Following the presentation, there will be a live demonstration of the ARAMIS system with a Q&A session.  Don’t miss this opportunity to see where testing is headed!

Where:

  • School: Duke University
  • Building: Hudson Hall
  • Room: 125
  • Address: Science Dr, Durham, NC 27710
Feb
25
Tue
ARAMIS Training@Trilion – Southfield, MI
Feb 25 – Feb 28 all-day

ARAMIS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

February 25 – 26 will cover basic training while February 27 – 28 will cover advanced training.

Campus Map

Register Below

Register for ARAMIS Training@Trilion MI - February 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here
Mar
25
Wed
ARGUS Training@Trilion – Southfield, MI
Mar 25 – Mar 27 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - March 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
May
12
Tue
ARAMIS Training@Trilion – King of Prussia, PA
May 12 – May 15 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses applications. Everyone is welcome, and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

May 12-13 will cover basic training, while May 14-15 will cover advanced training.

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406
Click here for Hotel discount rate at the Hyatt less than 2 miles away from our office

Register Below

Register for ARAMIS Training@Trilion - May 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jun
3
Wed
ARGUS Training@Trilion – Southfield, MI
Jun 3 – Jun 5 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - June 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Jun
17
Wed
ARAMIS Training@Trilion – Seattle, WA
Jun 17 – Jun 18 all-day

ARAMIS Training@Trilion – Seattle, WA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome, and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

Where: ATLAS Workbase

Pacific Northwest
(206) 596-1133
500 Mercer St., Suite C2
Seattle, WA 98109

Register Below

Register for ARAMIS Training@Trilion Seattle - June 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Aug
11
Tue
ARAMIS Training@Trilion – Southfield, MI
Aug 11 – Aug 14 all-day

ARAMIS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

August 11-12 will cover basic training while August 13 – 14 will cover advanced training.

Time: 9:30 am – 5:00 pm

Campus Map

Register Below

Register for ARAMIS Training@Trilion MI - August 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Sep
2
Wed
ARGUS Training@Trilion – Southfield, MI
Sep 2 – Sep 4 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome, and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in the Engineering Building, Room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - September 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Oct
6
Tue
ARAMIS Training@Trilion – King of Prussia, PA
Oct 6 – Oct 9 all-day

ARAMIS Training@Trilion – King of Prussia, PA

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses applications. Everyone is welcome and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

October 6-7 will cover basic training while October 8-9 will cover advanced training.

Hotel:
HYATT PLACE PHILADELPHIA/KING OF PRUSSIA
440 American Avenue
King of Prussia, Pennsylvania 19406

Click here for Hotel discount rate at the Hyatt less than 2 miles away from our office

Register Below

Register for ARAMIS Training@Trilion - October 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Oct
14
Wed
ARAMIS Training – San Jose, CA
Oct 14 – Oct 15 all-day

ARAMIS Training Workshop – San Jose, CA

This ARAMIS Training Workshop is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome, and there is no charge for members of Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers.

Where:

TBA

Register Below

Register for ARAMIS Training in San Jose, CA - Oct. 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.
Dec
9
Wed
ARGUS Training@Trilion – Southfield, MI
Dec 9 – Dec 11 all-day

ARGUS Training@Trilion – Southfield, MI

Training@Trilion is offered to current users of the technology to continuously advance skills and knowledge of features, uses, and applications. Everyone is welcome, and there is no charge for members with Trilion Gold Support! The training sessions will be led by our team of experienced Applications Engineers and will be held in room E152.

Campus Map

Register Below

Register for ARGUS Training@Trilion MI - December 2020

  • If you know your current Trilion Support status please enter the level (Gold, Silver or Bronze) and/or confirmation job number here.